BEGIN:VCALENDAR
VERSION:2.0
METHOD:PUBLISH
BEGIN:VEVENT
ORGANIZER;CN=ESTAD 2023:mailto:info@metec-estad.com
LOCATION:Room 7
SUMMARY:RFID high temperature identification for the steel industry
DESCRIPTION:In the steel industry, things can get pretty hot in a rough and dirty environment. To ensure reliable material tracking, optimum warehouse organization and smooth shipping logistics under these adverse conditions, modern and efficient identification solutions are required - ideally automated. This is exactly where S+P Samson has its roots and where it has acquired over 40 years of experience. The robust GRAPHIPLAST® data carriers have been customized for the requirements of the steel industry and can be used either as a self-adhesive label or a hangtag. 

The new ID4track® RFID High Temperature hangtag is a polymer film with a 1-side heat-resistant coating. The material withstands a continuous load up to 360 °C / 680 °F, for a short time up to max. 450 °C / 842 °F and is weather, aging and scratch resistant. 
Its resistance to ultraviolet radiation makes it suitable for outdoor use.
A protective shield over the RFID inlay ensures trouble-free use in drying processes with high temperatures. 
The tags are attached with metal clips.

Read range at non-metals is up to 8 m and up to 5 m at metals. 
The new ID4track® RFID High Temperature Tag consists of three main components:  
1.	tag material: GRAPHIPLAST® 7377.140 with a tear-out strength of 140N 
2.	transponder: bonded on PI substrate and works in the UHF frequency band of 860 to 960 MHz (ETSI and FCC, ISO/IEC 18000-6C). It is based on the chip NXP UCODE 7xm (EPC: max. 448 bit, TID: 96 bit factory locked, User memory: 2048 bit) 
3.	protective heat-shield: also GRAPHIPLAST® 7377.140

The RFID solution for your processes in the steel industry and its difficult industrial identification requirements.

CLASS:PUBLIC
DTSTART:20230615T143000
DTEND:20230615T145000
END:VEVENT
END:VCALENDAR